News

Carpet Cleaning and tips???

Posted by on Jan 4, 2020 in News | Comments Off on Carpet Cleaning and tips???

I found this useful article online A+ Carpet Cleaning Longview WA 360-578-2439 www.carpetcleaninglongview.com Carpet Cleaner Tip Calculator Bill $ Tip % % Tip Amount $ Total $ Splitting the Bill? Number of People Tip per Person $ Total per Person $ Carpet cleaners don’t have an easy job. Every job they go to, they have to set up and take down all of their cleaning tools, which likely takes them just about as much time as the actual cleaning. Most carpet cleaners have a tank that they carry around in their van and truck, as well as hundreds of feet of hose that they have to snake through your house. Furthermore, so they can clean every square inch of carpet, they often boost up your furniture on gliders so they can clean every nook and cranny. It’s a long job, and no house is fast or easy. The standard tip for carpet cleaners is anywhere from $5-$20 per person, but it’s not mandatory and you’ll likely surprise whomever you try to slip some money to. One situation where you shouldn’t tip your carpet cleaner is if you know he or she owns the actual carpet cleaning business. The reason is that if he or she believes your house warrants a higher service fee, they’ll likely let you know and charge you. However, for all other people on the job, use your personal gut-feeling to determine whether or not a tip is warranted. Did your house’s layout make getting the cleaning supplies difficult? Were the stains particularly bad but the cleaner was able to get them out anyway? As with any tipping scenario, if you feel the person went above and beyond and gave you excellent service, tip him or her to let them know you appreciate their work. Serving Kalama WA Servpro chemdry �K�&��/� 0��T���wTw�����+�j�f6�H�^�]0vN��BU�w�0�7�gc!ʥӸ�igx��ٮ��&X�{ YTK37q3� ��09nz�\y񚡑�pV...

Read More

Carpet Cleaning tips

Posted by on Dec 29, 2019 in News | Comments Off on Carpet Cleaning tips

Having your carpets cleaned is a chore that usually falls into the same category as spring cleaning: not very fun to do but necessary, and should occur at approximately the same level of frequency. Most carpet owners, however, will only have their carpets cleaned once every few years (and some not even that). Carpet cleaning is not just important for removing stains. Having your carpet cleaned will improve and prolong your carpet’s performance. How Often Should You Clean Your Carpet? To keep your carpet looking and performing well for as long as possible, manufacturers recommend having your carpet cleaned at minimum every 12–18 months, depending on the amount of traffic in your home. In fact, such frequent cleaning is a condition of many warranties—be sure to carefully read your warranty information. Nylon Carpet While regular cleaning is important for all types of carpet, it is especially true in the case of nylon carpeting. Nylon contains a hydrogen molecule. This is the primary source of nylon’s resiliency. When the fibers have been flattened down due to foot traffic, cleaning reactivates the hydrogen molecule, causing the fibers to literally bounce back. The cleaning will actually revive the carpet and enhance performance. Hot Water Extraction and So-Called “Steam Cleaning” The method of carpet cleaning recommended by most carpet manufacturers is hot water extraction, which is more commonly (though slightly incorrectly) known as steam cleaning. In the hot water extraction method, hot water is essentially sprayed on the carpet and then sucked back into the machine, along with any dirt that was on the carpet. There is usually a cleaning solution added to the water to assist in the removal ofstains and soiling. This is different from the process of true steam cleaning. However, today it is widely accepted that the term steam cleaning actually refers to hot water extraction, the most common carpet cleaning process.  Professional Carpet Steam Cleaning Professional cleaners may use either a truck-mounted unit or a portable machine. The portable machine has obvious benefits, such as being able to be used in apartment and condo buildings in units that would otherwise be beyond the reach of a truck-mounted unit’s hose. However, truck-mounted units are more powerful than portable units and should be used whenever possible for maximum efficiency. DIY Carpet Steam Cleaning There is an abundance of do-it-yourself (DIY) steam cleaning machinesavailable for either rent or purchase. With so many different machines on the market, it can lead you to wonder if you should skip calling in the professionals and just tackle the job yourself. If your household is prone to spills or accidents that are difficult to clean, a small cleaner may be a worthwhile purchase to have on hand. However, for more general cleaning of your entire carpet surface, it’s highly recommended to have a professional come to do it. Risks of DIY Generally, DIY machines do not heat the water to the same high temperature as professional machines, which results in less effective cleaning. In addition, these machines are not as powerful as the ones professionals use, which means that they are not able to extract as much of the water (and therefore dirt) from the carpet. When properly done, the carpet should be only slightly damp after it has been thoroughly cleaned. Wet carpet indicates that the machine was not powerful enough to do the job effectively. If your carpet is very wet after cleaning, use fans to speed up the drying, and be sure to stay off it until it is dry. Do not replace the furniture before the carpet is completely dry. Other variables—such as the amount of cleaner added to the machine and the technique for using the machine i.e. how fast/slow to move across the carpet—present several opportunities for things to go wrong with DIY machines or at least not as well as with professional cleaners. Cost-Saving Concerns If you are concerned about the cost of having a professional come to clean your carpets, consider having only the “traffic areas” cleaned. This means that your big pieces of furniture, like the sofa, bed, etc., are left in place and...

Read More

Carpet Cleaning Longview WA 98632

Posted by on Dec 29, 2019 in News | Comments Off on Carpet Cleaning Longview WA 98632

A+ Carpet Cleaning 2431 Mcatee Drive Longview WA 98632 360-578-2439 we serve all of Cowlitz county including Longview Kelso Castle Rock Kalama Woodland Cathlamet Puget Island Toutle Silver Lake Rainier Oregon Clatskanie Oregon Chem.-dry chemdry hansons hansens steamers carpet cleaning puirri heavens best Stanley steamer zero rez zero residue sears post-new.php Having your carpets cleaned is a chore that usually falls into the same category as spring cleaning: not very fun to do but necessary, and should occur at approximately the same level of frequency. Most carpet owners, however, will only have their carpets cleaned once every few years (and some not even that). Carpet cleaning is not just important for removing stains. Having your carpet cleaned will improve and prolong your carpet’s performance. How Often Should You Clean Your Carpet? To keep your carpet looking and performing well for as long as possible, manufacturers recommend having your carpet cleaned at minimum every 12–18 months, depending on the amount of traffic in your home. In fact, such frequent cleaning is a condition of many warranties—be sure to carefully read your warranty information. Nylon Carpet While regular cleaning is important for all types of carpet, it is especially true in the case of nylon carpeting. Nylon contains a hydrogen molecule. This is the primary source of nylon’s resiliency. When the fibers have been flattened down due to foot traffic, cleaning reactivates the hydrogen molecule, causing the fibers to literally bounce back. The cleaning will actually revive the carpet and enhance performance. Hot Water Extraction and So-Called “Steam Cleaning” The method of carpet cleaning recommended by most carpet manufacturers is hot water extraction, which is more commonly (though slightly incorrectly) known as steam cleaning. In the hot water extraction method, hot water is essentially sprayed on the carpet and then sucked back into the machine, along with any dirt that was on the carpet. There is usually a cleaning solution added to the water to assist in the removal ofstains and soiling. This is different from the process of true steam cleaning. However, today it is widely accepted that the term steam cleaning actually refers to hot water extraction, the most common carpet cleaning process.  Professional Carpet Steam Cleaning Professional cleaners may use either a truck-mounted unit or a portable machine. The portable machine has obvious benefits, such as being able to be used in apartment and condo buildings in units that would otherwise be beyond the reach of a truck-mounted unit’s hose. However, truck-mounted units are more powerful than portable units and should be used whenever possible for maximum efficiency. DIY Carpet Steam Cleaning There is an abundance of do-it-yourself (DIY) steam cleaning machinesavailable for either rent or purchase. With so many different machines on the market, it can lead you to wonder if you should skip calling in the professionals and just tackle the job yourself. If your household is prone to spills or accidents that are difficult to clean, a small cleaner may be a worthwhile purchase to have on hand. However, for more general cleaning of your entire carpet surface, it’s highly recommended to have a professional come to do it. Risks of DIY Generally, DIY machines do not heat the water to the same high temperature as professional machines, which results in less effective cleaning. In addition, these machines are not as powerful as the ones professionals use, which means that they are not able to extract as much of the water (and therefore dirt) from the carpet. When properly done, the carpet should be only slightly damp after it has been thoroughly cleaned. Wet carpet indicates that the machine was not powerful enough to do the job effectively. If your carpet is very wet after cleaning, use fans to speed up the drying, and be sure to stay off it until it is dry. Do not replace the furniture before the carpet is completely dry. Other variables—such as the amount of cleaner added to the machine and the technique for using the machine i.e. how fast/slow to move across the carpet—present several opportunities for things to go wrong with DIY machines or at...

Read More

A+ Carpet Cleaning Kelso Longview WA

Posted by on Aug 17, 2019 in News | Comments Off on A+ Carpet Cleaning Kelso Longview WA

We clean carpets in Longview Kelso Castlerock Cathlamet Kalama Rose Valley Brook Hollow Tim-wa Lexington Beacon Hill 360-578-2439 www.carpetcleaninglongview.com call 7 days a week

Read More

Carpet Cleaning Longview / Kelso WA 98632

Posted by on Aug 17, 2019 in News | Comments Off on Carpet Cleaning Longview / Kelso WA 98632

H Updated: March 29, 2019 Explore this ArticleCleaning the RoomFilling the Steam CleanerSteaming the Entire CarpetArticle SummaryQuestions & AnswersRelated ArticlesReferences Steam cleaning carpets is a good practice to remove dirt and debris stuck deep in the carpet fibers. It requires a steam cleaning machine, soap, and water. Wait for a good time to do it, when foot traffic will be low and the weather is warm and dry so you can open up windows to dry out the carpet when you’re done. Be sure to clear the room out and vacuum thoroughly before steam cleaning. Fill the machine with hot water and the appropriate amount of soap. Your machine may work whether it is pushed or pulled, but make sure you read the operating instructions carefully. Start in a corner and cross the room back and forth making long strips. Allow plenty of drying time and use fans to dry the carpet. Part1Cleaning the Room 1Remove everything from the room. Steam cleaning is most effective when you remove all toys, papers, and general clutter from the floor. Move all tables, chairs, and furniture out of the room. Clear as much of the floor space as you can.If some furniture is too heavy to move, place squares of wax paper, foil, wood blocks, or plastic film under the legs to protect them from the moisture of the steam cleaner. You can’t clean the carpet completely if you leave furniture in the room.If you don’t have room to move the furniture to another room, move it all to half of the room and do the room in two separate sections. Let the carpet dry before you move furniture back to the already cleaned half.2Dust the baseboards. As you run the steam cleaner, you might knock dust off the baseboards if you don’t dust them beforehand. Use a dust cloth with wood polish or a long handled duster to remove as much of the dust as you can.Dust ceiling fans and corners of the ceiling to prevent extra dust from falling on the carpet after you have steam cleaned them.3Vacuum the entire carpet carefully. Steam cleaners are meant to pull up small dirt particles that are down in the fibers of the carpet. They are not for removing hair and larger dirt pieces. Vacuum the entire room more slowly than you usually would. It is best to go over the room twice to get as much of the larger debris as possible. The second time, go over the room in the opposite direction to pick up more dirt.[1]For extra cleaning, use a nozzle attachment to get right up to the baseboards and edges of the room.Vacuuming also fluffs up the carpet so that the steamer can clean the fibers more effectively.4Use stain remover on specific bad spots. Steamers can’t always lift deep, set-in stains, so it’s always helpful to treat stains before steaming the carpet. Use a carpet stain remover, or other natural solutions if you prefer. Blot the stain remover up with a cloth or leave it to be sucked up by the machine.[2]When you do this, dab at the stains with a cloth. Never scrub at stains as this can cause them to work deeper into the carpet. Part2Filling the Steam Cleaner 1Fill the steam cleaner with hot water. Most machines have a heating mechanism for the water, but using hot water helps. Use water that is as hot as possible without actually being boiling. Only put as much water as the machine directs so that you don’t overfill the water tank. Look for a max fill line on the water tank.[3]Some natural fiber carpet can shrink from hot water or be harmed by detergent, so always be aware of what type of carpet you are planning to steam clean.[4]2Add soap as directed. Steam cleaners usually use a detergent of some kind, so make sure to check the machine’s instructions to use the right kind. Only use the amount directed, as using too much soap will cause it to stay in the carpet.Some machines will have a specific compartment where the soap goes, and others might...

Read More

Spots vs. stains

Posted by on Jun 5, 2019 in News | Comments Off on Spots vs. stains

A+ Carpet & Furniture Cleaning 2431 Mcatee Drive Longview Washington 98632 360-578-2439 www.carpetcleaninglongview.com Nothing in a facility says you have let your floors go like spots that inevitably appear in the most high profile of places. As a facility manager, your proficiency in spotting is essential. In this article we are going to talk about some of the basics you will need to get the job done.  One of the first things you will need is an understanding of what constitutes a “spot” versus a “stain.” While we may use the words spot and stain interchangeably, there is an important difference between the two. According to the Institute of Inspection, Cleaning, and Restoration Certification (IICRC) R100 Reference Guide for Professional Cleaning of Textile Floor Coverings, a spot is defined as “the result of a material adding substance or texture to a fabric or surface,” while a stain is “the result of a material adding color (without texture) to a fabric or surface.” Understanding the difference between a spot and a stain is significant because it may be easy to remove a spot from a carpet fiber, but stains become part of the structure of the filament since the color is absorbed. To further complicate stain removal, the dyes found in most common spots and spills are acid dyes that are the same type of dyes used to color many commercial carpets. Therefore, spotting agents designed to remove color must be used with care and patience to prevent color loss. Identification One of the most common mistakes when attempting to clean a spot or stain is not identifying what type of problem it is or the correct detergent for treatment. There are multiple ways to identify a spot or a stain. One way is by appearance. If the appearance is shiny, it could be oil based, or if the appearance is dull and crusty, it could be sugar based. Another way to identify the type of mess you have on your hands is to feel the spot or stain while wearing gloves. If you can’t feel any difference in texture compared to the rest of the carpet, there’s a high possibility it’s a material that added color, making it a stain. If it has a texture to it that you can feel, then most likely you are dealing with a spot. Where to Start It’s impossible to address every combination of spot and spotter in a few pages; however, let’s start with this basic understanding: You must use formulated dry solvents or d-limonene-based spotters to remove oil-based spots. Water-based spotters will not remove oily substances from carpet because water and oil do not mix. Dry solvents are liquids with no water in them. Although you would never use gasoline to clean carpet, it is an example of a familiar dry solvent. It is a liquid that contains no water. Common Removal Problems The most common problems for carpets are spots that reappear within 24-48 hours, which is also known as “wicking.” Wicking is the result of soil migrating from within the pile of the carpet through capillary action. Generally, we only remove the spot on the surface of the carpet that we can see, which means there is more to our problem than typically meets the eye. Consider a spot on the carpet the size of a baseball that you physically see with your eyes. If we were to pull the carpet up and look at the backing, the spot could be the size of a bowling ball. This is caused by the spill spreading out when it hits the backing of the carpet, thus creating a much larger spot than we usually see on the surface. The best way to avoid spots appearing through wicking is to blot or extract the carpet as dry as possible during the spotting process and then use air movers to finish the drying. The faster you dry the carpet, the less chance you have of spots wicking back to the surface. The most effective method for rinsing and removing residue from a spot...

Read More